AEM Electronics CD-7 Non-Logging Digital Dash Display, (30-5500)

More Views

AEM Electronics CD-7 Non-Logging Digital Dash Display, (30-5500)

Product SKU : 30-5500

$1,998.88 NZD (inclds GST)

The CD-7/CD-7L color digital displays feature a super bright, high contrast, sunlight readable display and include an integrated glare diffuser and shade hood so that they are readable in even the brightest daylight conditions. They are designed to accept channels from CAN bus connections and do not include analog inputs.

Two CAN bus channels are included so that it can receive and collect data from AEMnet enabled devices such as the Infinity ECU, Series 2 EMS or EMS-4, and 3rd Party Devices (see Supported Apps Tab), including PDM’s, CAN sensor modules and programmable engine management systems. The CD-7 is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are also duplicated on the rear connector allowing the user to mount remote buttons on the steering wheel if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing.

Four packages are available:

  • PN 30-5500, CD-7 Non-Logging Display
  • PN 30-5501, CD-7L Logging Display
  • PN 30-5502, CD-7 with Vehicle Dynamics Module
  • PN 30-5503, CD-7L with Vehicle Dynamics Module

Supported Apps:

In addition to all of AEM's CAN based products, AEM has available validated and confirmed CAN setups for the following 3rd party products. We currently have over 150 validated 3rd party applications, and offer a CD-7 Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted below and can be viewed on our Install Kits tab.

A 2-Way DTM Style termination receptacle plug will be needed to create an adapter harness if a Plug & Play Adapter Harness is not available. We supply DTM-style connectors that can be viewed on the the DTM-Style Connector kits page. The required 2-Way DTM-Receptacle part number is 35-2619, and it can also be found on the Buy/Instructions tab.

  • Adaptronic M1200, M2000, M6000 ECUs
  • Adaptronic Modular series Plug-in ECUs
  • Autosport Labs, AnalogX 4 Channel Analog to CAN Module
  • BigStuff GEN4 Pro Xtreme ECUs
  • Bosch IMU 2-Axis Accel & Yaw Sensor
  • FAST XFI 2.0 ECU
  • gaugeART 31-001, 8 Ch Analog Expansion Module
  • GM/Delphi MEFI-4b ECUs
  • Haltech Elite 550, 750, 1000, 1500, 2000, 2500 ECUs
  • Haltech Platinum Pro, Platinum Sport and Platinum Sprint ECUs
  • Haltech WBC1 & WBC2, 1 & 2 Ch CAN widebands
  • Holley HP EFI, Dominator EFI ECUs CD-7 to Holley EFI Plug & Play Adapter Cable Available
  • Hondata KPro4 and S300 V3 ECUs
  • KMS MD35 ECU
  • KMS Single Ch CAN wideband
  • KMS 4 Ch EGT Module
  • KMS 4 Ch Wheelspeed Module
  • KMS 2 Ch DBW Module
  • KMS Flex Fuel CAN Module
  • Life Racing F42, F88, F90 & GDI Series ECUs
  • Link G4+ based ECUs CD-7 to LinkG4+ ECUs Plug & Play Adapter Cable Available
  • Megasquirt, MS3 ECU
  • MicroTech LT-9C, LT-10C, LT-15C & LT-16C ECUs
  • Motec M1, M84, M400, M600, M800, & M880 ECUs
  • Motec PDM15, PDM16, PDM30 & PDM32 Power Distribution Modules
  • Motec PLM Lambda Module
  • Motec LTC, LTCD Lambda to CAN Modules
  • Motec E888, E816, CAN Expansion Modules
  • MSD AtomicEFI Throttle Body ECUs CD-7 to MSD Atomic TBI Plug & Play Adapter Cable Available
  • MSD GRID Programmable Ignition
  • PCS EGT-2000, 8 Ch EGT Module
  • ProEFI Pro128, Pro112, and Pro48 ECUs
  • RaceGrade TC8, 8 Ch EGT Module
  • RaceGrade 8 Ch and 15 Ch Keypads
  • Racepak V300SD, V500SD, Sportsman, G2X, & G2XPro Loggers
  • Racepak 220-VM-USM, Universal 4 Sensor Analog Modules
  • Racepak 220-VP-IRXXXX, IR Tire & Brake Temp Modules
  • Racepak 220-VP-JBXXXX, Exhaust Temp Modules
  • Racepak 220-VP-PTXXXX, Pressure Sensor Modules
  • Racepak 220-VP-PTXXXX, Wheelie Bar Force Modules
  • Racepak 220-VP-RIDEHTXX, Laser Ride Height Modules
  • Racepak 220-VP-TCXXXX, Thermocouple Modules
  • Racepak 220-VP-TRXXXX, Coolant/Air/Oil/Trans/Diff Temp Modules
  • Syvecs S6, S6+, S6I, S8, SDI & S12 ECU’s
  • Techmor AC-1-4, 4 Ch Analog Expansion Module
  • Techmor IR-1 Non-Contact IR Tire Temperature Module
  • Techmor AP-1, 16 Ch Aero Pressure Sensor Module
  • Techmor SG-1-C, Strain Gauge Amplifier Module
  • Vi-PEC i44-i88 ECUs CD-7 to Vi-Pec i44/i88 ECUs Plug & Play Adapter Cable Available

Beyond the CAN setups AEM have validated, also have created many CAN setup files that are based on the published 3rd party manufacturers CAN specifications. But be aware that since we have not validated these ourselves you should confirm their proper operation before depending on them.

  • Bosch Motorsports, MS3.0 Sport, MS4.0 Sport, MS4.3 ECUs
  • Bosch Motorsports, LT4 Lambdatronic 4 Ch Lambda Module
  • Daytona Sensors HEFI5 2 Ch Lambda Module
  • DTAFast S40pro, S60Pro, S80Pro, S100Pro ECUs
  • ECUMaster EMU & EMUBlack ECUs
  • EFI Technology Italy Euro-8 ECU
  • EFI Technology USA X2, X5, R4, R8, & R16 ECUs
  • Electromotive TEC3r, TECgt, TECs, & TECm ECUs
  • Emerald K6 & K3 ECUs
  • EMtron KV8, KV12, KV16, SL4, SL8 ECUs
  • Izze Racing, 16 Ch IR Tire & Brake Temp Modules
  • Izze Racing, 6 DOF Inertial Measurement Unit
  • Life Racing PDU10, PDU16 & PDU32 Power Distribution Modules
  • Link CAN-Lambda Module
  • Performance Electronics PE3 Series ECUs
  • Stack TPMS-Lite & TPMS-Pro Tire Pressure Measurement Systems
  • Syvecs PDU10, PDU16 & PDU32 Power Distribution Modules
  • Texense IRN4C, IRN8C, 4 Ch & 8 Ch IR Tire Temp Sensors
  • Texense THN4x, 4 Ch Thermocouple Module

Additional Information

Freight Cost : $10.00 Within NZ - Includes Tracking
Additional info : Orders are shipped daily via NZCouriers at 3:30PM. Tracking is emailed to buyer. NZCouriers are generally overnight delivery. Rural delivery can take 2-3 days.

Customer Reviews

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars