AEM CD-7 Carbon Digital Racing Dash Displays, Non-Logging with Internal GPS, (30-5702)

Product SKU : 30-5702

$2,244.62 NZD (inclds GST)

DSR Does not stock the AEM dashes, they are a special order. AEM often upgrade software so it is best to have a brand new fully update dash. Please allow 5 working days to recieve this dash from the time AEM ships it to New Zealand.

AEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g/26.1 oz. to only 595g/20.9oz. That’s almost 1/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors! The new CD-7 Carbon digital displays also have optional integrated 20Hz GPS, which replaces the dash packages that included a Vehicle Dynamics Module. Of course, the Vehicle Dynamics Module still works with any CD Digital Dash Display and can be purchased separately.


OVERVIEW
CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.

VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
The CD-7 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-7 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-7 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go! All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screens or warning alerts.

Third-party systems will require download of 3rd party DBC CAN bus protocol files for proper operation if they are not included in our setup software. We currently have over 250 validated 3rd party applications, and include a CD Dash Power Cable to simplify the installation of 3rd party devices. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted on our Supported Apps Tab and can be viewed on our Install Kits Tab.

Four packages are available:

  • PN 30-5700, CD-7 Carbon Non-Logging/ Non-GPS Display
  • PN 30-5701, CD-7L Carbon Logging Display
  • PN 30-5702, CD-7G Carbon Non-Logging Display with Internal GPS
  • PN 30-5703, CD-7LG Carbon Logging Display with Internal GPS



CD-7 CARBON FEATURES:

  • Full color 7” screen with 800x480 resolution
  • Direct sunlight readable (1000cd/m2 brightness and anti-glare filter)
  • Layout files interchangeable with all versions of the CD-5 Carbon
  • Wiring interface/harness is identical to the CD-5 Carbon
  • Rugged, lightweight flow-molded carbon fiber composite enclosure
  • Total display weight of 20.9 oz. / 595 grams
  • IP65 water resistance - open cockpit, marine and motorcycle safe
  • Accepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by side
  • Plug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUs
  • Accepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)
  • Install the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)
  • Available with or without 200Mb internal logging (up to 1,000Hz/channel)
  • Available with or without on-board 20Hz GPS receiver and antenna
  • Add a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)
  • Add an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately)
  • Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pages
  • Dedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)
  • Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.
  • Use included page layouts and input your channels and text, or create your own from scratch
  • Free DashDesign Graphics Editor software
  • Seven LED RPM/shift light indicators on top of the housing (programmable and dimmable)
  • Two programmable LEDs
  • Odometer function
  • Over 200 supplied fully programmable SAE and custom warning icons, and you can add your own
  • ‘Headlight-in’ connection dims the dash and LEDs during night operation
  • Two extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)
  • User supplied graphics can be changed based on channel values (up to the full screen size)
  • Convert CAN bus channel values to user-defined text in multiple languages

In addition to all of AEM's CAN based products, AEM has available validated and confirmed CAN setups for the following 3rd party products. We currently have over 230 validated 3rd party applications, and supply a CD-7 Power Cable to simplify the installation of 3rd party devices with every CD Digital Dash Display. We have also developed 3rd Party Plug & Play Adapter Cables for certain applications, which are highlighted below and can be viewed on our Install Kits tab.

A 2-Way DTM Style termination receptacle plug will be needed to create an adapter harness if a Plug & Play Adapter Harness is not available. We supply DTM-style connectors that can be viewed on the the DTM-Style Connector kits page. The required 2-Way DTM-Connector Kit part number is 35-2620, and it can also be found on the Buy/Instructions tab.

  • Adaptronic M1200, M2000, M6000 ECUs
  • Adaptronic Modular series Plug-in ECUs
  • Autosport Labs, AnalogX 4 Channel Analog to CAN Module
  • BigStuff GEN4 Pro Xtreme ECUs
  • Bosch IMU 2-Axis Accel & Yaw Sensor
  • EFI Technology S.r.l. Euro-4 ECU
  • EMS EM-Tech EM70, EM80, EM140, EM160 & EM180 ECUs
  • FAST XFI 2.0 ECU
  • gaugeART 31-001, 8 Ch Analog Expansion Module
  • GM/Delphi MEFI-4b ECUs
  • Haltech Elite 550, 750, 950, 1000, 1500, 2000, 2500, 2500T ECUs
  • Haltech Elite VMS, VMS-T
  • Haltech Platinum Pro, Platinum Sport and Platinum Sprint ECUs
  • Haltech WBC1 & WBC2, 1 & 2 Ch CAN widebands
  • Holley HP EFI, Dominator EFI ECUs CD-7 to Holley EFI Plug & Play Adapter Cable Available
  • Hondata KPro4 and S300 V3 ECUs
  • KMS MD35 ECU
  • KMS Single Ch CAN wideband
  • KMS 4 Ch EGT Module
  • KMS 4 Ch Wheelspeed Module
  • KMS 2 Ch DBW Module
  • KMS Flex Fuel CAN Module
  • Life Racing F42, F88, F90 & GDI Series ECUs
  • Link G4+ based ECUs CD-7 to LinkG4+ ECUs Plug & Play Adapter Cable Available
  • Link CAN-Lambda Module
  • Megasquirt, MS3, MS2, Microsquirt, DIYPNP & MSPNP Gen2 ECUs
  • MicroTech LT-9C, LT-10C, LT-15C & LT-16C ECUs
  • Motec M1, M84, M400, M600, M800, & M880 ECUs
  • Motec PDM15, PDM16, PDM30 & PDM32 Power Distribution Modules
  • Motec PLM Lambda Module
  • Motec LTC, LTCD Lambda to CAN Modules
  • Motec E888, E816, CAN Expansion Modules
  • MSD AtomicEFI Throttle Body ECUs CD-7 to MSD Atomic TBI Plug & Play Adapter Cable Available
  • MSD GRID Programmable Ignition
  • PCS EGT-2000, 8 Ch EGT Module
  • Performance Electronics PE3 Series ECUs
  • Polaris RZR XP-900, RZR XP-1000, & RZR XP-Turbo ECUs
  • ProEFI Pro128, Pro112, and Pro48 ECUs
  • RaceGrade TC8, 8 Ch EGT Module
  • RaceGrade 8 Ch and 15 Ch Keypads
  • Racepak V300SD, V500SD, Sportsman, G2X, & G2XPro Loggers
  • Racepak 220-VM-USM, Universal 4 Sensor Analog Modules
  • Racepak 220-VP-IRXXXX, IR Tire & Brake Temp Modules
  • Racepak 220-VP-JBXXXX, Exhaust Temp Modules
  • Racepak 220-VP-PTXXXX, Pressure Sensor Modules
  • Racepak 220-VP-PTXXXX, Wheelie Bar Force Modules
  • Racepak 220-VP-RIDEHTXX, Laser Ride Height Modules
  • Racepak 220-VP-TCXXXX, Thermocouple Modules
  • Racepak 220-VP-TRXXXX, Coolant/Air/Oil/Trans/Diff Temp Modules
  • Syvecs S6, S6+, S6I, S8, SDI & S12 ECU’s
  • Techmor AC-1-4, 4 Ch Analog Expansion Module
  • Techmor IR-1 Non-Contact IR Tire Temperature Module
  • Techmor AP-1, 16 Ch Aero Pressure Sensor Module
  • Techmor SG-1-C, Strain Gauge Amplifier Module
  • Vi-PEC i44-i88 ECUs CD-7 to Vi-Pec i44/i88 ECUs Plug & Play Adapter Cable Available
  • Zeitronics Zt-3 CAN AFR Meter and Datalogging System

Beyond the CAN setups we have validated, we also have created many CAN setup files that are based on the published 3rd party manufacturers CAN specifications. But be aware that since we have not validated these ourselves you should confirm their proper operation before depending on them.

  • Bosch Motorsports, MS3.0 Sport, MS4.0 Sport, MS4.3 ECUs
  • Bosch Motorsports, LT4 Lambdatronic 4 Ch Lambda Module
  • Cosworth/Pectel SQ6, SQ6M, SQ6M12, MQ12, MQ12Di ECUs
  • Daytona Sensors HEFI5 2 Ch Lambda Module
  • DTAFast S40pro, S60Pro, S80Pro, S100Pro ECUs
  • ECUMaster EMU & EMUBlack ECUs
  • EFI Technology S.r.l. Euro-8 ECU
  • EFI Technology USA X2, X5, R4, R8, & R16 ECUs
  • Electromotive TEC3r, TECgt, TECs, & TECm ECUs
  • Emerald K6 & K3 ECUs
  • EMS EM-Tech EM70, EM80, EM140, EM160, EM180 ECUs
  • EMtron KV8, KV12, KV16, SL4, SL8 ECUs
  • Haltech E8 & E11v2 ECUs
  • Izze Racing, 16 Ch IR Tire & Brake Temp Modules
  • Izze Racing, 6 DOF Inertial Measurement Unit
  • Life Racing PDU10, PDU16 & PDU32 Power Distribution Modules
  • Mast Motorsports M90 and M120 ECUs
  • MaxxECU Street, Sport, Race & Pro ECUs
  • SCS Delta 400, 800, 880, GDi4, SDi4 ECUs
  • Stack TPMS-Lite & TPMS-Pro Tire Pressure Measurement Systems
  • Syvecs PDU10, PDU16 & PDU32 Power Distribution Modules
  • Texense IRN4C, IRN8C, 4 Ch & 8 Ch IR Tire Temp Sensors
  • Texense THN4x, 4 Ch Thermocouple Module

You can find all of these in our Forum. We will be continuously adding more 3rd Party Supported Applications for the CD-5 Carbon and CD-7 Carbon. If you do not see support for your CAN-based application, please check again at a later date or contact us to let us know your needs.

Additional Information

Freight Cost : $10.00 Within NZ - Includes Tracking
Additional info : Orders are shipped daily via NZCouriers at 3:30PM. Tracking is emailed to buyer. NZCouriers are generally overnight delivery. Rural delivery can take 2-3 days.