Nissan Skyline Main Studs, RB20, RB25, RB26, (202-5214, 202-5403)

More Views

Nissan Skyline Main Studs, RB20, RB25, RB26, (202-5214, 202-5403)

Product SKU : 202-5214

$255.26 NZD (inclds GST)

The below ARP kit is assembled on site by DSR using the same ARP part numbers from ARP 202-5403.DSR buys the parts from ARP individually and assemble it here on site, that way you the customer saves a lot of $$$. Cons; you don't get the ARP Blue box or the Lube.

If you want the Official ARP part number buy part number 202-5403 instead.

Nissan Skyline Main Stud Kit (202-5403/202-5214)

2.0L (RB20DET)
2.5L (RB25DET)
2.6L (RB26DETT) DOHC

This ARP Kit we supply for the RB Engine will not come in a ARP box. It will come with ARP 14 washers, ARP 14 nuts, ARP 11 studs & 3 Longer ARP Studs Only, It will not come with ARP Lube. The kit is assembled on site (Custom made) and shipped to the buyer. Torque settings are below.



There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel-ground washers and high quality nuts. Some applications have provisions for mounting windage trays and have specially designed standoff studs with serrated lock nuts to position the windage tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 200,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others.

INSTALLATION METHOD FOR MAIN STUD KITS
Part Number: 202-5214 Application: Nissan 2.6L (RB26 DETT) Inline 6-cyl
1. To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Chase the threads if necessary with ARP Thread Chaser, part number 912-0003 (M10 X 1.5).
2. Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension.
3. Screw the studs into the block “HAND TIGHT ONLY”.
4. Install the main caps and check for binding or misalignment.
5. Lubricate the stud threads, nuts and washers 
Then install the washers and the nuts onto the studs and tighten them hand tight.

PRELOAD (TORQUE) RECOMMENDATIONS
6. Following the manufacturers recommended torque sequence tighten the nuts in three equal steps to 60 ft lbs




 

Additional Information

Freight Cost : $5.00 Within NZ - Includes Tracking
Additional info : Orders are shipped daily via NZCouriers at 3:30PM. Tracking is emailed to buyer. NZCouriers are generally overnight delivery. Rural delivery can take 2-3 days.

Customer Reviews

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price